Armor SX5000 Silane/Siloxane Water Repellent For Concrete And Cinderblock

Armor SX5000 Silane/Siloxane Water Repellent For Concrete And Cinderblock from Foundation Armor LLC.

By: Foundation Armor LLC.  07/23/2013
Keywords: Concrete Repair, Concrete Resurfacing, Concrete Coatings

The Armor SX5000 is a low-VOC, solvent based silane/siloxane based water repellent for concrete, cinderblock (CMU), brick and unglazed tile. The Armor SX5000 penetrates and reacts with minerals within the substrate to create a hydrophobic barrier against water absorption. Solvent based silane-siloxane sealers have been proven to bond better, last longer, and perform better than water based silane/siloxane sealers! Advantages: Can be used on interior and exterior, horizontal or vertical, porous masonry and concrete surfaces. Superior efflorescence and strong alkali resistance. Resists damage cause by de-icing salts and freeze/thaw cycles. Provides excellent resistance to mold, mildew, and fungus. Provides superior water repellency, while allowing surface to breathe. Stops concrete dusting. TECHNICAL DATA Drying Time: 1-2 Hours Foot Traffic: 8-12 hours Wheel Traffic: 24-48 hours Application Temp: 50-850F Wet Appearance:Clear to slightly hazy Dry Appearance: Clear to invisible VOC Content:

Keywords: Concrete Coatings, Concrete Floors, Concrete Repair, Concrete Resurfacing, Concrete sealer, Concrete Sealers

Contact Foundation Armor LLC.

http://www.foundationarmor.com

Email

Print this page

Other products and services from Foundation Armor LLC.

07/26/2013

Armor JFX-35

The Armor JFX-35 Joint Filler is a technologically advanced, self leveling, 100% solids, two component, 1:1 ratio, Polyurea Elastomer joint filler.


07/26/2013

Armor FS-90

The Armor FS-90 is a rigid urethane concrete repair solution for floor cracks, driveway cracks, and cracks in concrete stairs.


Hydrophobic Polyurethane Concrete Crack Repair Kits from Foundation Armor LLC. thumbnail
07/26/2013

Hydrophobic Polyurethane Concrete Crack Repair Kits

The Foundation Armor 10FT concrete crack repair kit is a hydrophobic polyurethane based repair method for repairing moist, wet, or leaking cracks, and for repairing cracks on vertical or horizontal surfaces.


Armor Efflorescence Remover from Foundation Armor LLC. thumbnail
07/26/2013

Armor Efflorescence Remover

The Armor Efflorescence Remover is a proprietary blend of low odor acids, surfactants, and detergents. It can be used to remove efflorescence and clean concrete without discoloring or damaging the surface.


Armor Concrete Cleaner and Micro Etcher from Foundation Armor LLC. thumbnail
07/26/2013

Armor Concrete Cleaner and Micro Etcher

The Armor Concrete Cleaner & Micro Etcher deep cleans the concrete and opens up surface pores to allow for adequate adhesion for concrete coatings, and better acid staining color development and reaction.


Armor Cure and Seal from Foundation Armor LLC. thumbnail
07/26/2013

Armor Cure and Seal

The Armor Cure and Seal is a penetrating and breathable, non-yellowing, water based acrylic curing & sealing compound that provides a satin or low gloss finish to a multitude of interior & exterior horizontal or vertical concrete and masonry finishes.


07/26/2013

Armor Polyaspartic Coating: Stronger Than Epoxy High Gloss Concrete Coating

The Armor Polyaspartic Coating is a low odor, two-component Polyaspartic Aliphatic Polyurea coating which utilizes an innovative, proprietary Nano-technology.


Armor AE Fushion Epoxy Infused Acrylic Gloss Concrete Sealer from Foundation Armor LLC. thumbnail
07/24/2013

Armor AE Fushion Epoxy Infused Acrylic Gloss Concrete Sealer

The Armor AE Fusion Gloss is a penetrating and breathable, water-based epoxy infused acrylic that provides a superior high gloss finish to a multitude of interior horizontal or vertical concrete and masonry finishes.


Armor AR500 Clear Gloss Acrylic Concrete Sealer from Foundation Armor LLC. thumbnail
07/24/2013

Armor AR500 Clear Gloss Acrylic Concrete Sealer

The Armor AR500 Clear Gloss Coat sealer is a high solids, low VOC, solvent based 100% acrylic lacquer designed to protect your decorative concrete and provide it with a high gloss shine.


Armor AR350 Satin Sheen Acrylic Concrete Sealer from Foundation Armor LLC. thumbnail
07/24/2013

Armor AR350 Satin Sheen Acrylic Concrete Sealer

The Armor AR350 Satin Sheen sealer is a penetrating, low VOC, solvent based 100% enhanced acrylic lacquer designed to protect your decorative concrete and provide it with a soft satin sheen.


Armor SX5000WB Silane/Siloxane Water Based Water Repellent For Concrete And Cinderblock from Foundation Armor LLC. thumbnail
07/23/2013

Armor SX5000WB Silane/Siloxane Water Based Water Repellent For Concrete And Cinderblock

The Armor SX5000WB is a water based silane/siloxane based water repellent for concrete, cinderblock (CMU), brick, and unglazed tile.


Armor L3000 Penetrating, Concrete Hardener and Densifier from Foundation Armor LLC. thumbnail
07/23/2013

Armor L3000 Penetrating, Concrete Hardener and Densifier

The Armor L3000 will permanently harden and densify interior/exterior concrete.


Armor S2000 Penetrating, Waterproofing and Radon Reduction Concrete Sealer from Foundation Armor LLC. thumbnail
07/23/2013

Armor S2000 Penetrating, Waterproofing and Radon Reduction Concrete Sealer

The Armor S2000 Concrete Sealer is guaranteed to waterproof, strengthen, and protect concrete for a lifetime.


Armor S1000 Penetrating, Waterproofing Concrete Sealer from Foundation Armor LLC. thumbnail
07/23/2013

Armor S1000 Penetrating, Waterproofing Concrete Sealer

The Armor S1000 Concrete Sealer is guaranteed to waterproof, strengthen, and protect concrete for a lifetime.