Cushion/Target Tees | Gulf Manufacturing L.L.C

By: Gulf Manufacturing  11/26/2011
Keywords: Test Reports

Our cushion/target tees are manufactured from solid B/W tee forgings to meet ASME B16.9 dimensional requirements. Since they are made from solid tee forgings, any wall thickness is available. Special dimensional requirements are available upon request.

We carry these forgings in ASTM A105-N material to meet ASTM A/SA234WPB/C, 4130NQT(API 75k), and most items are available in High Yield. Stainless and special alloys are available upon request!

We stock thru 8” Nom. Forgings and can offer larger sizes upon request.

A cushion/target tee is a cushioned end 90 deg elbow. One end of the run is left solid! The term “Target” is still used today, but really applies to the old specification where a customer would request a “Lead-Filled” target tee. The user would x-ray the fitting to judge the corrosion in the line with the Lead filling being used as the “Target”.

Full Material Test Reports are available on all products.

Please contact us on any of your requirements!

Keywords: Test Reports

Contact Gulf Manufacturing

http://GULFMANUFACTURING.NET

Email - none provided

Print this page

Other products and services from Gulf Manufacturing

11/26/2011

Swivel Flanges | Gulf Manufacturing L.L.C

Swivel flanges are used mainly for installations where the connecting tubular product is already installed and the user needs to be able to swivel the bolting ring to match up to the next flange product. One is a "Light Weight" ANSI swivel flange product and the other is a "Heavy Weight" Sub-Sea swivel flange product. Currently an inventory is maintained on the most popular sizes and pressures in the ANSI Light Wt.


11/26/2011

Butt Weld Fittings | Gulf Manufacturing L.L.C

Weld Fittings such as concentric/eccentric reducers, straight and reducing tees, Weld caps, Crosses, Single or Double cushion Crosses, Long Radius 90 Deg. Gulf Manufacturing does carry other commodity wall thickness Weld Fittings manufactured by approved Domestic manufacturers. Return bends are available in any of the heavier wall thickness in carbon steeland in other material upon request.


11/26/2011

Home | Gulf Manufacturing L.L.C

We currently distribute our products through Oilfield and Industrial Supply companies throughout the United States and some overseas locations. Gulf Manufacturing was established in 1994 as a machining and specialty product addition to our distribution efforts. We added product lines and capabilities to better serve our customers.


11/26/2011

ANSI Flanges | Gulf Manufacturing L.L.C

Gulf Manufacturing does carry one of the largest inventory of High Hub blinds to produce the Reducing Specials that we all get calls on. These are carried in carbon steel and stainless steel to be able to ship on a quick turnaround basis. The ANSI flanges are manufactured to ASME B16.5 and to any of your customer’s special requirements. The manufactured items will mainly be in the higher pressures and specialty items.


11/26/2011

Blinds and Spacers | Gulf Manufacturing L.L.C

Gulf Manufacturing, manufactures Figure 8’s, Paddle blinds and spacers in carbon steel, ASTM A105, Stainless Steel, Chromes, and any specialty alloy. The Figure 8’s and Paddle blinds/spacers are manufactured to API-590, ASME B16.48, and to any of your customer furnished dimensional requirements. These can be offered in Machine Finish or Mill finish depending upon your customer’s preference.


11/26/2011

API Flanges | Gulf Manufacturing L.L.C

They are produced from Product Specification Level 1 through Product Specification Level 3 in the appropriate materials required by the specification. Gulf Manufacturing produces a complete line of API flanges to API-6A, including Weldnecks, Blinds, and Companion Flanges. Full Material Test Reports and any Additional Testing Certificates are available on all products.


11/26/2011

Bleed Rings | Gulf Manufacturing L.L.C

Gulf Manufacturing stocks bleed rings in a semi-finished condition so that we can do whatever connections are required and ship them sooner. Both styles of bleed rings are available: For raised face installation and for Ring Type Joint installations. We stock these in carbon steeland have stainless steel and other alloys available upon request.