Parallel Roll Alignment Laser Alignment Line Laser Alignment SX-5100 - rollcheck mini

By: Seiffert Industrial  11/22/2011
Keywords: Laser, Laser Alignment, Laser Beam

Laser Roll Alignment System

SX-4100 RollCheck® MINI

With Patented Reflected Laser Beam Technology

The ROLLCHECK® MINI laser alignment system for parallel roll alignment is lightweight, compact and durable. The system can be attached to a roll up to 4” (101 mm) in diameter with the supplied straps. We use our proven reflected laser beam technology for maximum angular  resolution, thus providing you with the most reliable and accurate visual reading.

The ROLLCHECK® MINI can measure spans up to 3 ft. (1 m) from roll to roll sizes up to 4” (101 mm) in diameter. A laser line is projected from the ROLLCHECK® MINI transmitter to the reflector mounted on the roll to be checked or aligned. The laser line projected to the reference line on the reflector indicates immediately if the roll is aligned vertically to the stationary roll. The laser line is then automatically reflected back to the transmitter’s reference line indicating if the rolls are parallel to one another. This system is very easy to use; a single person can perform the alignment task in minutes with no training! The ROLLCHECK® MINI

comes in its own durable carrying case.


Advantages and features are as follows:

  • Reduces down time and product waste due to misalignment of rolls 
  • Increases production with proper alignment of rolls
  • Compact design, fits into small spaces
  • Fast and easy
  • No training required
  • One-person operation
  • Facilitates more frequent roll checks
  • Pays for itself quickly
  • Used for shots up to 10 ft. (3 m) or better
Resources

Keywords: Alignment System, Laser, Laser Alignment, Laser Beam, Roll Alignment

Contact Seiffert Industrial

http://www.seiffertindustrial.com

Email - none provided

Print this page

Other products and services from Seiffert Industrial

11/22/2011

Parallel Roll Alignment Laser Alignment Line Laser Alignment SX-5100 - rollcheck

A Laser emitter mounted on a reference roll projects two green laser lines onto the reflector unit mounted on the roll to be measured and adjusted, allowing the operator to view the alignment condition. Patented reflected beam technology provides an effective, fast and simple way to measure and correct vertical angle and horizontal angle between the rolls.


11/22/2011

Pulley Partner Sheave Pulley Lifting Pulley Serpentine Pulley Laser Pulley - pulley partner ec

The Pulley Partner EC® economy laser pulley alignment system is lightweight, compact and durable. This system is fully upgradeable to the much more accurate reflector system at any time. The unit magnetically attaches to the inside or outside face of any pulley or sprocket. Reduces vibration and belt noise.


11/22/2011

Pulley Pro Green Reflected Laser Beam Laser Pulley Alignment Tool

We use proven reflected beam technology for maximum angular resolution; thus providing you with the most reliable and accurate readings that no other laser pulley alignment tool or method can match. Using the latest in Green laser diode technology makes our green laser line 10x’s brighter to the operator than a red laser line. More accurate and efficient than any other tool or conventional method.


11/22/2011

Level Measurement Tools Flatness Measure Angle Measurement Tool

The deviation in distance between the laser plane and the measurement object is measured in one or more positions with the use of the receiver. It is particularly beneficial to combine flatness measurement with shaft alignment when installing rotating machinery. The angle guide displays the accepted measurement point registration area. Green arrows show you in which direction to adjust towards zero.


11/22/2011

Long Range Laser Pulley Alignment System

We use our proven reflected laser beam technology for maximum angular resolution, thus providing you with the most reliable and accurate readings that no other method or tool can match. The Pulley Partner LRS® is a long range laser pulley alignment system that is lightweight. More accurate and efficient than any other tool or conventional method. KX-2500LRS - Pulley Partner® Long Range System. Reduces vibration and belt noise.


11/22/2011

Pulley Partner Sheave Pulley Lifting Pulley Serpentine Pulley Laser Pulley - pulley partner

We use our proven reflected laser beam technology for maximum angular resolution, thus providing you with the most reliable and accurate readings that no other method or tool can match. More accurate and efficient than any other tool or conventional method. The Pulley Partner® laser pulley alignment system is lightweight. Reduces vibration and belt noise.


11/22/2011

Laser Alignment Bore Alignment Precision Leveling Belt Alignment

The deviation in distance between the laser beam and the measurement object is measured in two or more positions with the use of a receiver. Typical straightness applications are measurements of machine guides, machine beds, machine ways, and guide rails. The straightness application is measured in two axis where the laser beam is used as reference. The angle guide displays the accepted measurement point registration area.