Helmholz AI 2/4 x R, RTD, 16-Bit, 2/3/4-wire – Automate Control Engineering Ltd.

Helmholz AI 2/4 x R, RTD, 16-Bit, 2/3/4-wire – Automate Control Engineering Ltd. from Automate Control Engineering Ltd.

By: Automate Control Engineering Ltd.  12/10/2015
Keywords: Automate, Control, Engineering, Helmholz, AI, 2/4 x R, RTD, 16-Bit, 2/3/4-wire,

Helmholz AI 2/4 x R, RTD, 16-Bit, 2/3/4-wire – Automate Control Engineering Ltd. ([email protected]) General characteristics - 2/4 inputs for measuring resistance (electrically isolated from the backplane bus) - 4 process input words - Measuring ranges: 150 ohms, 300 ohms, 600 ohms, 3000 ohms, 6000 ohms, PT100, PT1000, Ni100, Ni1000, LG-Ni1000, individually configurable for each channel - Can accommodate 2/3/4-wire sensors - Measurement resolution of 15 bits + sign - Diagnostic messages - Wire break detection - Limit value alarms for each channel - A bi-color LED (blue/red) indicates the module’s operating status and any malfunctions Module parameters - Diagnostic alarm: ON | OFF - Overflow/underflow diagnosis: ON | OFF - Representation values: SIMATIC* S7 | SIMATIC* S5 - Temperature unit: Celsius x 10 | Fahrenheit x 10 | Kelvin x 10 Parameters for each channel - Wire break detection: ON | OFF - Interference frequency suppression: None | 10 Hz | 50 Hz | 60 Hz | 400 Hz - Measuring range: 150 ohms | 300 ohms | 600 ohms | 3,000 ohms | 6,000 ohms | PT100 | PT1000 | Ni100 | Ni1000 | LG-Ni1000 - Sensor type: Disabled | 2-wire | 3-wire (channels 0 & 2 only) | 4-wire (channels 0 & 2 only) - Limit value alarms enabled: ON | OFF - Upper/lower limit: 16-bit analog value (±27648) Technical data/Ordering data Analog Input Module - AI 2/4 x R, RTD, 16-Bit, 2/3/4-wire S/N: 600-253-4AD01 Number of inputs: 2/4 Electrically isolated from backplane bus: Yes Channels electrically isolated from each other: No Current draw - External: Not required - Internal: Max. 140 mA Verlustleistung: Max. 1.0 W Measuring ranges: 150 ohms 300 ohms 600 ohms 3,000 ohms 6,000 ohms PT100 PT1000 Ni100 Ni1000 LG-Ni1000 Measuring method: Integration Measurement resolution: 15 bits + sign Interf. frequency suppression: None | 10 Hz | 50 Hz | 60 Hz | 400 Hz Diagnoses: Upper measuring range limit exceeded (overflow) Lower measuring range limit fallen below (underflow) Wire break Parameter assignment error Process alarms: Upper and lower limit per channel Error limits - Operational error limit: ±0.5 % within the entire temperature range, relative to the nominal range - Basic error limit: ±0.3 %, operational error limit at 25 °C, relative to the nominal range - Temperature error: ±0.005 %/K relative to the nominal range - Linearity error: ±0.05 %/K relative to the nominal range - Repeating accuracy in steady state at 25 °C: ±0.05 %/K relative to the nominal range Parameter configuration length: 26 bytes Group error indicator: Red LED Hot-pluggable: Yes Dimensions (H x W x D): 110 mm x 14 mm x 73 mm Weight: Approx. 70 g

Keywords: Automate, Control, Engineering, Helmholz, AI, 2/4 x R, RTD, 16-Bit, 2/3/4-wire,

Contact Automate Control Engineering Ltd.

Email

Print this page

Other products and services from Automate Control Engineering Ltd.

Setra Pressure Transducers 230 – Automate Control Engineering Ltd. (anson@automate-ace.com) from Automate Control Engineering Ltd. thumbnail
12/12/2015

Setra Pressure Transducers 230 – Automate Control Engineering Ltd. ([email protected])

Setra Pressure Transducers 230 – Automate Control Engineering Ltd. ([email protected]) This wet to wet differential pressure transducer provides a high


Setra Pressure Transducers 225 – Automate Control Engineering Ltd. (anson@automate-ace.com) from Automate Control Engineering Ltd. thumbnail
12/12/2015

Setra Pressure Transducers 225 – Automate Control Engineering Ltd. ([email protected])

Setra Pressure Transducers 225 – Automate Control Engineering Ltd. ([email protected]) Low Cavity Volume Pressure Transducer for Fuel Cells Superior stability,


Setra Pressure Transducers 209 – Automate Control Engineering Ltd. (anson@automate-ace.com) from Automate Control Engineering Ltd. thumbnail
12/12/2015

Setra Pressure Transducers 209 – Automate Control Engineering Ltd. ([email protected])

Setra Pressure Transducers 209 – Automate Control Engineering Ltd. ([email protected]) Priced aggressively, these transducers meet the most demanding performance requirements


Setra Test & Measurement 205 – Automate Control Engineering Ltd. (anson@automate-ace.com) from Automate Control Engineering Ltd. thumbnail
12/12/2015

Setra Test & Measurement 205 – Automate Control Engineering Ltd. ([email protected])

Setra Test & Measurement 205 – Automate Control Engineering Ltd. ([email protected]) Low price and a high level output signal make


Setra Test & Measurement 204 – Automate Control Engineering Ltd. (anson@automate-ace.com) from Automate Control Engineering Ltd. thumbnail
12/12/2015

Setra Test & Measurement 204 – Automate Control Engineering Ltd. ([email protected])

Setra Test & Measurement 204 – Automate Control Engineering Ltd. ([email protected]) Ideally suited to applications that require 0.1% accuracy. The


Setra Test & Measurement 141 – Automate Control Engineering Ltd. (anson@automate-ace.com) from Automate Control Engineering Ltd. thumbnail
12/12/2015

Setra Test & Measurement 141 – Automate Control Engineering Ltd. ([email protected])

Setra Test & Measurement 141 – Automate Control Engineering Ltd. ([email protected]) A highly accurate accelerometer that can maintain a stable


Northstar SLIM Tach® RL67 heavy duty encoder – Automate Control Engineering Ltd. from Automate Control Engineering Ltd. thumbnail
12/12/2015

Northstar SLIM Tach® RL67 heavy duty encoder – Automate Control Engineering Ltd.

Northstar SLIM Tach® RL67 heavy duty encoder – Automate Control Engineering Ltd. ([email protected]) APPLICATION/INDUSTRY The SLIM Tach® RL67 heavy-duty encoder


NorthStar SLIM Tach® HS56 Industrial Heavy Duty Encoders – Automate Control Engineering Ltd. from Automate Control Engineering Ltd. thumbnail
12/12/2015

NorthStar SLIM Tach® HS56 Industrial Heavy Duty Encoders – Automate Control Engineering Ltd.

NorthStar SLIM Tach® HS56 Industrial Heavy Duty Encoders – Automate Control Engineering Ltd. ([email protected]) The SLIM Tach® HS56’s magnetoresistive sensor


NorthStar RIM Tach® 8500 Mill-Duty Encoders – Automate Control Engineering Ltd. from Automate Control Engineering Ltd. thumbnail
12/12/2015

NorthStar RIM Tach® 8500 Mill-Duty Encoders – Automate Control Engineering Ltd.

NorthStar RIM Tach® 8500 Mill-Duty Encoders – Automate Control Engineering Ltd. ([email protected]) The RIM Tach® 8500 is the most reliable


Dynapar Series HS35 Sealed Hollow Shaft – Automate Control Engineering Ltd. (anson@automate-ace.com) from Automate Control Engineering Ltd. thumbnail
12/12/2015

Dynapar Series HS35 Sealed Hollow Shaft – Automate Control Engineering Ltd. ([email protected])

Dynapar Series HS35 Sealed Hollow Shaft – Automate Control Engineering Ltd. ([email protected]) • Hollow Shaft design eliminates mounting bracket, flexible


BD LMP 808 Sensor – Automate Control Engineering Ltd. (anson@automate-ace.com) from Automate Control Engineering Ltd. thumbnail
12/12/2015

BD LMP 808 Sensor – Automate Control Engineering Ltd. ([email protected])

BD LMP 808 Sensor – Automate Control Engineering Ltd. ([email protected]) - Separable plastic submersible transmitter with stainless steel sensor -


BD LMP307 Sensor – Automate Control Engineering Ltd. (anson@automate-ace.com) from Automate Control Engineering Ltd. thumbnail
12/12/2015

BD LMP307 Sensor – Automate Control Engineering Ltd. ([email protected])

BD LMP307 Sensor – Automate Control Engineering Ltd. ([email protected]) - Stainless steel probe with stainless steel sensor - Stainless steel


BD LMP 305 Sensor – Automate Control Engineering Ltd. (anson@automate-ace.com) from Automate Control Engineering Ltd. thumbnail
12/12/2015

BD LMP 305 Sensor – Automate Control Engineering Ltd. ([email protected])

BD LMP 305 Sensor – Automate Control Engineering Ltd. ([email protected]) - Submersible probes - Slimeline stainless steel probe with stainless


BD LMK 358 Sensor – Automate Control Engineering Ltd. (anson@automate-ace.com) from Automate Control Engineering Ltd. thumbnail
12/12/2015

BD LMK 358 Sensor – Automate Control Engineering Ltd. ([email protected])

BD LMK 358 Sensor – Automate Control Engineering Ltd. ([email protected]) - Separable stainless steel probe with ceramic diaphragm - Ceramic


BD LMK 307 Sensor – Automate Control Engineering Ltd. (anson@automate-ace.com) from Automate Control Engineering Ltd. thumbnail
12/12/2015

BD LMK 307 Sensor – Automate Control Engineering Ltd. ([email protected])

BD LMK 307 Sensor – Automate Control Engineering Ltd. ([email protected]) - Stainless steel submersible transmitter with ceramic sensor - Ceramic