Helmholz TB20-C, Bus Coupler CANopen® Slave – Automate Control Engineering Ltd.

Helmholz TB20-C, Bus Coupler CANopen® Slave – Automate Control Engineering Ltd. from Automate Control Engineering Ltd.

By: Automate Control Engineering Ltd.  12/10/2015
Keywords: Automate, Control, Engineering, Helmholz, TB20-C, Bus, Coupler, CANopen®, Slave,

Helmholz TB20-C, Bus Coupler CANopen® Slave – Automate Control Engineering Ltd. ([email protected]) The CANopen® bus coupler is designed to connect a CAN bus to TB20 peripheral modules. It supports the CANopen® protocol as per DS 301 and uses the DSP-401 profile for digital and analog I/O modules. A functioning TB20 configuration will always require a bus coupler and at least one peripheral module, but can accommodate up to 64 modules of any kind connected in series with the bus coupler. The CANopen® bus coupler supports hot-swapping for replacing modules during operation. This coupler makes it possible to use SDOs to freely access all I/O values, parameters, and diagnostics, and can manage up to 256 bytes of I/O data with the PDO protocol. General characteristics - CANopen® protocol as per DS301 and DSP401 - Bit rates of 20 kbps to 1 Mbps - 16 TPDOs/16 RPDOs - One SDO server - Heartbeat producer - Two heartbeat consumers - Node guarding - SYNC object - Storable parameter configuration - A maximum of 64 modules - Supports hot-plug - 24 VDC power supply - Integrated power supply unit for powering TB20 peripheral modules (2.5 A) - Supplies the I/O voltage (24 VDC) - DIP switches for configuring the node ID and bit rate; can be covered - 5 LEDs, one of them bi-color - USB device port for online diagnosis with TB20 ToolBox Technical data/Ordering data TB20-C, Bus Coupler CANopen® Slave S/N: 600-160-1AA11 CAN interface - Protocol: CANopen® as per DS301 V4.2 and DSP401 V3.0.0 - Bit rate: 20, 50, 125, 250, 500, 800, 1000 kbps - TPDOs: 16 - RPDOS: 16 - Interface: ISO 11898-2 - Connector: 9-pin D-sub male connector USB port - Protocol: Full-speed USB 2.0 Device - Connector: Mini-USB - Electrical isolation: Yes - Isolation voltage: 1.5 kV Power supply: 24 VDC, 18–28 VDC Current draw without modules (internal): 75 mA Power dissipation: Max. 8 W Power supply for modules: 5 VDC; max 2.5 A Dimensions (H x W x D): 110 mm x 35 mm x 73 mm Weight: 115 g Certifications: CE, UL pending Noise immunity: DIN EN 61000-6-2 “EMC Immunity” Interference emission: DIN EN 61000-6-4 “EMC Emission” Vibration and shock resistance: DIN EN 60068-2-8:2008 “Vibration” DIN EN 60068-27:2010 “Shock” Protection rating: IP 20 Relative humidity: 95 % without condensation Installation position: Any Permissible ambient temperature: 0 °C to 60 °C Transport and storage temperature: -20 °C to 80 °C

Keywords: Automate, Control, Engineering, Helmholz, TB20-C, Bus, Coupler, CANopen®, Slave,

Contact Automate Control Engineering Ltd.

Email

Print this page

Other products and services from Automate Control Engineering Ltd.

Setra Pressure Transducers 230 – Automate Control Engineering Ltd. (anson@automate-ace.com) from Automate Control Engineering Ltd. thumbnail
12/12/2015

Setra Pressure Transducers 230 – Automate Control Engineering Ltd. ([email protected])

Setra Pressure Transducers 230 – Automate Control Engineering Ltd. ([email protected]) This wet to wet differential pressure transducer provides a high


Setra Pressure Transducers 225 – Automate Control Engineering Ltd. (anson@automate-ace.com) from Automate Control Engineering Ltd. thumbnail
12/12/2015

Setra Pressure Transducers 225 – Automate Control Engineering Ltd. ([email protected])

Setra Pressure Transducers 225 – Automate Control Engineering Ltd. ([email protected]) Low Cavity Volume Pressure Transducer for Fuel Cells Superior stability,


Setra Pressure Transducers 209 – Automate Control Engineering Ltd. (anson@automate-ace.com) from Automate Control Engineering Ltd. thumbnail
12/12/2015

Setra Pressure Transducers 209 – Automate Control Engineering Ltd. ([email protected])

Setra Pressure Transducers 209 – Automate Control Engineering Ltd. ([email protected]) Priced aggressively, these transducers meet the most demanding performance requirements


Setra Test & Measurement 205 – Automate Control Engineering Ltd. (anson@automate-ace.com) from Automate Control Engineering Ltd. thumbnail
12/12/2015

Setra Test & Measurement 205 – Automate Control Engineering Ltd. ([email protected])

Setra Test & Measurement 205 – Automate Control Engineering Ltd. ([email protected]) Low price and a high level output signal make


Setra Test & Measurement 204 – Automate Control Engineering Ltd. (anson@automate-ace.com) from Automate Control Engineering Ltd. thumbnail
12/12/2015

Setra Test & Measurement 204 – Automate Control Engineering Ltd. ([email protected])

Setra Test & Measurement 204 – Automate Control Engineering Ltd. ([email protected]) Ideally suited to applications that require 0.1% accuracy. The


Setra Test & Measurement 141 – Automate Control Engineering Ltd. (anson@automate-ace.com) from Automate Control Engineering Ltd. thumbnail
12/12/2015

Setra Test & Measurement 141 – Automate Control Engineering Ltd. ([email protected])

Setra Test & Measurement 141 – Automate Control Engineering Ltd. ([email protected]) A highly accurate accelerometer that can maintain a stable


Northstar SLIM Tach® RL67 heavy duty encoder – Automate Control Engineering Ltd. from Automate Control Engineering Ltd. thumbnail
12/12/2015

Northstar SLIM Tach® RL67 heavy duty encoder – Automate Control Engineering Ltd.

Northstar SLIM Tach® RL67 heavy duty encoder – Automate Control Engineering Ltd. ([email protected]) APPLICATION/INDUSTRY The SLIM Tach® RL67 heavy-duty encoder


NorthStar SLIM Tach® HS56 Industrial Heavy Duty Encoders – Automate Control Engineering Ltd. from Automate Control Engineering Ltd. thumbnail
12/12/2015

NorthStar SLIM Tach® HS56 Industrial Heavy Duty Encoders – Automate Control Engineering Ltd.

NorthStar SLIM Tach® HS56 Industrial Heavy Duty Encoders – Automate Control Engineering Ltd. ([email protected]) The SLIM Tach® HS56’s magnetoresistive sensor


NorthStar RIM Tach® 8500 Mill-Duty Encoders – Automate Control Engineering Ltd. from Automate Control Engineering Ltd. thumbnail
12/12/2015

NorthStar RIM Tach® 8500 Mill-Duty Encoders – Automate Control Engineering Ltd.

NorthStar RIM Tach® 8500 Mill-Duty Encoders – Automate Control Engineering Ltd. ([email protected]) The RIM Tach® 8500 is the most reliable


Dynapar Series HS35 Sealed Hollow Shaft – Automate Control Engineering Ltd. (anson@automate-ace.com) from Automate Control Engineering Ltd. thumbnail
12/12/2015

Dynapar Series HS35 Sealed Hollow Shaft – Automate Control Engineering Ltd. ([email protected])

Dynapar Series HS35 Sealed Hollow Shaft – Automate Control Engineering Ltd. ([email protected]) • Hollow Shaft design eliminates mounting bracket, flexible


BD LMP 808 Sensor – Automate Control Engineering Ltd. (anson@automate-ace.com) from Automate Control Engineering Ltd. thumbnail
12/12/2015

BD LMP 808 Sensor – Automate Control Engineering Ltd. ([email protected])

BD LMP 808 Sensor – Automate Control Engineering Ltd. ([email protected]) - Separable plastic submersible transmitter with stainless steel sensor -


BD LMP307 Sensor – Automate Control Engineering Ltd. (anson@automate-ace.com) from Automate Control Engineering Ltd. thumbnail
12/12/2015

BD LMP307 Sensor – Automate Control Engineering Ltd. ([email protected])

BD LMP307 Sensor – Automate Control Engineering Ltd. ([email protected]) - Stainless steel probe with stainless steel sensor - Stainless steel


BD LMP 305 Sensor – Automate Control Engineering Ltd. (anson@automate-ace.com) from Automate Control Engineering Ltd. thumbnail
12/12/2015

BD LMP 305 Sensor – Automate Control Engineering Ltd. ([email protected])

BD LMP 305 Sensor – Automate Control Engineering Ltd. ([email protected]) - Submersible probes - Slimeline stainless steel probe with stainless


BD LMK 358 Sensor – Automate Control Engineering Ltd. (anson@automate-ace.com) from Automate Control Engineering Ltd. thumbnail
12/12/2015

BD LMK 358 Sensor – Automate Control Engineering Ltd. ([email protected])

BD LMK 358 Sensor – Automate Control Engineering Ltd. ([email protected]) - Separable stainless steel probe with ceramic diaphragm - Ceramic


BD LMK 307 Sensor – Automate Control Engineering Ltd. (anson@automate-ace.com) from Automate Control Engineering Ltd. thumbnail
12/12/2015

BD LMK 307 Sensor – Automate Control Engineering Ltd. ([email protected])

BD LMK 307 Sensor – Automate Control Engineering Ltd. ([email protected]) - Stainless steel submersible transmitter with ceramic sensor - Ceramic