Slat Belt Conveyors
The standard K-Flex K10SF-AD slat is used primarily in tray service applications but is well suited to many other environments as well.
This belt can be removed from the corners or anywhere along the conveyor slide bed for detailed cleaning. With a long-lasting finish and available in an assortment of colors, there is no equivalent to the K-Flex Slat Belt.
The standard K-Flex Control Panel is mounted above the drive unit or placed in another convenient location for employees. The box is all stainless steel with a watertight panel face that hinges down for service. Start/stop controls along with speed adjust and wash/detergent functions can be manually controlled. The panel shown below, is mounted under a table section for a customer who wanted a specific location. There is usually no additional charge for this non-standard location.
Operating Temperature Range: (ambient) – 0 degrees Celsius to 55 degrees Celsius
Minimum Power Feed: 24V
Other Power Feed: 120-240V
K-Flex Standard Panel = 120V incoming
K-Flex Output Power to Devices = 24V or 12V. K-Flex Speed Adjustable Motors are 230V 3-Phase AC.