Change-over at your fingertips

Change-over at your fingertips from Lika Electronic

By: Lika Electronic  09/17/2014
Keywords: Motion Control, Touch Screens, Lcd Display

LDT10 is the HMI touch panel designed to interface, set up and operate the whole series of RD rotary actuators with RS-485 Modbus interface. Our goal was to create an HMI that is intuitive to use and does not require any specific know-how; thus you have not to cope with daunting experiences and can focus on your own business. You need to cut set-up time and reduce downtimes while preventing errors at the same time. Now you can with LDT10, in just one touch: a great advantage when small-batches, one-off items and just-in-time productions call for frequent format adjustments, especially in multi-axes systems such as mold changers for the plastics industry, mobile stops, packaging and woodworking machineries, labelling machines. LDT10 is intended to connect one single actuator (point-to-point connection), an array of actuators and even an array of different models of actuators (such as RD1A along with RD4 and RD5) in the same network. Few pages with basic menus and commands enable a user-friendly approach. The NETWORK screen features the actuators available in the network while the RD CONFIG screen is intended to configure the work parameters (velocity, acceleration, deceleration, ...). The RECIPES screen allows to collect information on the specific process (i.e. work cycle of each actuator, travel, …) and save it in recipes. The HOME PAGE screen is always available at the operator's fingertips: recipes are listed and ready to be selected: just one touch to start the production for the greatest simplicity and operational agility. LDT10 comes in a 7-inch 16:9 format LCD display with resistive touch screen panel. Its rugged construction complies with NEMA4 and IP65 protection ratings and allows for use in typically industrial environments.

Keywords: Industrial Technologies, Lcd Display, Modbus interface, Motion Control, resistive panel, Rotary Actuators, Touch Panel, Touch Screens,

Contact Lika Electronic

Email

Print this page

Other products and services from Lika Electronic

Encoders for Industrial Robots, Motors and OEM applications from Lika Electronic thumbnail
12/05/2016

Encoders for Industrial Robots, Motors and OEM applications

At latest SPS IPC Drives exhibition in Nuremberg Lika Electronic especially focused on the range of encoders designed to be integrated into robotic systems as well as into motors and OEM applications. They are compact and modular and tailored to exactly meet the specific needs of the individual automation processes.


XC77 / XAC77 ATEX certified encoders The tough accuracy for hazardous and heavy-duty applications from Lika Electronic thumbnail
11/15/2016

XC77 / XAC77 ATEX certified encoders The tough accuracy for hazardous and heavy-duty applications

XC77 / XAC77 is the high performance incremental, fieldbus and Ethernet encoder family with ATEX certification from Lika Electronic. It combines robustness, accuracy and flexibility for use in hazardous and extreme environments and the roughest applications and is ideally suited for a variety of tricky sectors such as mining industry, iron and steel mills, offshore facilities, oil and gas industry, oil rigs, iron & steel industry, chemical & fertilizing industry.


Heavy-duty encoders for shipbuilding industry from Lika Electronic thumbnail
10/21/2016

Heavy-duty encoders for shipbuilding industry

Encoders for shipbuilding industry, marine installations and offshore facilities are born out of Lika's long-standing, solid experience in the field. They are designed to cope with extreme and high aggressive environmental conditions. Stainless steel enclosures and special surface treatments and sealings ensure safe protection against salt water and corrosion. They are rugged and can withstand heavy mechanical stresses, shocks and vibrations and large temperature fluctuations up to -40°C +100°C


ATEX certified encoders from Lika Electronic thumbnail
10/21/2016

ATEX certified encoders

Lika Electronic has developed a comprehensive range of ATEX certified encoders: XC77 series, XAC77 series and XAC80 series. They are designed to cover a wide variety of critical applications in hazardous and harsh areas “in which explosive atmospheres caused by gases, vapours, mists or air/dust mixtures are likely to occur occasionally” (category 2 encoders) and “in which explosive atmospheres caused by gases, vapours, mists, or air/dust mixtures are unlikely to occur or, if they do occur, are


Wide range of draw-wire encoders with Ethernet and fieldbus interfaces from Lika Electronic thumbnail
10/04/2016

Wide range of draw-wire encoders with Ethernet and fieldbus interfaces

SFA-5000/SFA-10000 is the extensive series of absolute cable-pulling encoders with measuring lengths up to 5,000 mm (196.85”) and 10,000 mm (393.7”) and a large variety of Ethernet and fieldbus interfaces: Profinet, EtherCAT, POWERLINK, Profibus, CANopen, DeviceNet. The range also includes the user-friendly analogue absolute version settable via buttons, the SSI version and the SFE programmable incremental version.


Extending the range of ATEX incremental encoders from Lika Electronic thumbnail
02/02/2016

Extending the range of ATEX incremental encoders

Lika Electronic introduces a complete series of ATEX category 3 incremental encoders: they are intended for use in potentially explosive zones 2/22 and offer the broadest range of connection options.


Arcs and curved axes: all they take is the right encoder from Lika Electronic thumbnail
02/02/2016

Arcs and curved axes: all they take is the right encoder

Don't settle for any transducer: incremental SMR5H and absolute SMLA encoders are specifically designed for accurate installation and measurement on arcs and curved surfaces up to 360°.


Programmable draw-wire encoder, a first for market! from Lika Electronic thumbnail
04/17/2015

Programmable draw-wire encoder, a first for market!

Lika Electronic introduces a new range of incremental and absolute draw-wire encoders with increased measuring lengths up to 5,000 mm (196.85”) and 10,000 mm (393.7”). Worthy of remark the first cable-pulling measuring system with integral programmable incremental encoder.


All-round wheeled encoder for conveyor systems from Lika Electronic thumbnail
03/03/2015

All-round wheeled encoder for conveyor systems

IR01 is the underbelt measuring system encompassing a double rubber wheel with integrated incremental encoder and the mounting support in the same package. Easy to install, it tracks displacements more precisely.


SMP encoder for linear guideways from Lika Electronic thumbnail
03/03/2015

SMP encoder for linear guideways

SMP is the magnetic encoder designed for feedback on linear guideways, carriages, slides, positioning tables and all applications that need the scale to be mounted laterally.


One encoder, 16,384 encoders from Lika Electronic thumbnail
02/02/2015

One encoder, 16,384 encoders

IQ58/CKQ58 programmable incremental encoder from Lika Electronic is conceived to be as multipurpose and adaptive as you need it to be. Discover how its complete programmability and the several mechanical and electrical configurations guarantee the flexibility and versatility to perfectly meet the widest of specific industrial requirements.


Best in price analogue encoder from Lika Electronic thumbnail
11/13/2014

Best in price analogue encoder

With its quality feature set and the attractive price tag, MS40 series from Lika Electronic further grows adding the 4-20 mA and 0-10V analogue interface today.


Tough for rough! from Lika Electronic thumbnail
11/13/2014

Tough for rough!

MMK36 is the only multiturn absolute encoder with bearingless shaft in the market. Still it is capable of reliably and safely withstanding the most aggressive environmental conditions and ideally suited even for position measurements at speeds up to 4,000 RPM.


SFP draw-wire encoders gain analogue outputs from Lika Electronic thumbnail
10/08/2014

SFP draw-wire encoders gain analogue outputs

Lika Electronic is releasing new SFP series cable-pulling encoders that provide linear position feedback over distances from 300 mm / 11.8” to 2000 mm / 78.7” and analogue outputs now.


SSI to Profibus IF55 gateway from Lika Electronic thumbnail
10/08/2014

SSI to Profibus IF55 gateway

Connect your Lika SSI encoder to Profibus with the new IF55 gateway. IF55 gateway allows complete integration and full compliance with the Profibus-DP protocol.