One encoder, 16,384 encoders

One encoder, 16,384 encoders from Lika Electronic

By: Lika Electronic  02/02/2015
Keywords: Motion Control, Industrial Automation, Encoder

IQ58/CKQ58 programmable incremental encoder from Lika Electronic provides the individual specifications with an all-round solution. Thanks to both the full parametrization via PC (such as of the pulse number and the electrical interface features) and the broad range of mechanical and electrical connection options (including solid and hollow shafts, connector and cable outputs, etc.) it is totally customizable and offers complete adaptability, versatility and freedom for any kind of application. IQ58/CKQ58 is a general-purpose encoder designed for standard installations at a reasonable price. It features a robust magnetic scanning and can be programmed to accommodate any value from 1 to 16,384 pulses. It provides AB0 and inverted /AB0 signals via Push-Pull & Line Driver compatible output circuit. The output signal voltage level is according to the input voltage (+5VDC … +30VDC). In addition the Index mark position and duration (90° or 180° el.) as well as the counting direction (CW and CCW) can be set via the PC tool supplied for free. IQ58/CKQ58 comes in the standard 58-mm (2.28”) flange diameter design and the whole range of mechanical configurations. Hollow (Ø 14, 15 mm; 0.55”, 0.59”) and solid (Ø 6, 8, 9.52, 10, 12 mm / 0.24”, 0.31”, 3/8”, 0.39”, 0.47”) shaft versions are available in a 100% safely-sealed enclosure with IP65 protection rating. M12 and M23 connector as well as cable options in either axial or radial output are offered. To meet the requirements of high-end and demanding applications the IP58/CKP58 programmable incremental encoder is also available. It adds a plus of benefits to the characteristics of IQ58. IP58 encompasses a precise optical scanning and is programmable from 1 to 65,536 PPR. Furthermore it is able to achieve a typical accuracy of ±0.005° and a counting frequency up to 800 kHz. In order to improve convenience and speed up the installation setup IP58 is fitted with a push-button located externally on the case: it allows to easily set the Index mark at any position (in addition the Index mark can be programmed via PC or set remotely by applying an external signal). A further advantage is the Universal output circuit (Push-Pull & Line Driver compatible) and the selectable output signal voltage level: it can be either +5VDC or according to the input voltage to match individual application demands. IP58 further allows for extended -40°C +100°C (-40°F +212°F) operating temperatures. Two LEDs for improved diagnostic information complement the remarkable features of the top choice. Lika Electronic products portfolio includes a wide selection of programmable incremental and absolute encoders designed for the most diverse applications and needs. Pick from the comprehensive list at http://bit.do/Lika-Programmable-Encoders .

Keywords: Absolute Encoders, Encoder, Encoders, Hollow Shaft, Incremental Encoders, Incremental programmable encoders, Industrial Automation, Industrial Technologies, Lika Electronic, Line Driver, Magnetic Encoders, magnetic measuring system, Motion Control, Optical Encoders, Programmable Encoders, Programmable pulses, Rotary Encoders, Universal circuit,

Contact Lika Electronic

Email

Print this page

Other products and services from Lika Electronic

XC77 / XAC77 ATEX certified encoders The tough accuracy for hazardous and heavy-duty applications from Lika Electronic thumbnail
11/15/2016

XC77 / XAC77 ATEX certified encoders The tough accuracy for hazardous and heavy-duty applications

XC77 / XAC77 is the high performance incremental, fieldbus and Ethernet encoder family with ATEX certification from Lika Electronic. It combines robustness, accuracy and flexibility for use in hazardous and extreme environments and the roughest applications and is ideally suited for a variety of tricky sectors such as mining industry, iron and steel mills, offshore facilities, oil and gas industry, oil rigs, iron & steel industry, chemical & fertilizing industry.


Heavy-duty encoders for shipbuilding industry from Lika Electronic thumbnail
10/21/2016

Heavy-duty encoders for shipbuilding industry

Encoders for shipbuilding industry, marine installations and offshore facilities are born out of Lika's long-standing, solid experience in the field. They are designed to cope with extreme and high aggressive environmental conditions. Stainless steel enclosures and special surface treatments and sealings ensure safe protection against salt water and corrosion. They are rugged and can withstand heavy mechanical stresses, shocks and vibrations and large temperature fluctuations up to -40°C +100°C


ATEX certified encoders from Lika Electronic thumbnail
10/21/2016

ATEX certified encoders

Lika Electronic has developed a comprehensive range of ATEX certified encoders: XC77 series, XAC77 series and XAC80 series. They are designed to cover a wide variety of critical applications in hazardous and harsh areas “in which explosive atmospheres caused by gases, vapours, mists or air/dust mixtures are likely to occur occasionally” (category 2 encoders) and “in which explosive atmospheres caused by gases, vapours, mists, or air/dust mixtures are unlikely to occur or, if they do occur, are


Wide range of draw-wire encoders with Ethernet and fieldbus interfaces from Lika Electronic thumbnail
10/04/2016

Wide range of draw-wire encoders with Ethernet and fieldbus interfaces

SFA-5000/SFA-10000 is the extensive series of absolute cable-pulling encoders with measuring lengths up to 5,000 mm (196.85”) and 10,000 mm (393.7”) and a large variety of Ethernet and fieldbus interfaces: Profinet, EtherCAT, POWERLINK, Profibus, CANopen, DeviceNet. The range also includes the user-friendly analogue absolute version settable via buttons, the SSI version and the SFE programmable incremental version.


Extending the range of ATEX incremental encoders from Lika Electronic thumbnail
02/02/2016

Extending the range of ATEX incremental encoders

Lika Electronic introduces a complete series of ATEX category 3 incremental encoders: they are intended for use in potentially explosive zones 2/22 and offer the broadest range of connection options.


Arcs and curved axes: all they take is the right encoder from Lika Electronic thumbnail
02/02/2016

Arcs and curved axes: all they take is the right encoder

Don't settle for any transducer: incremental SMR5H and absolute SMLA encoders are specifically designed for accurate installation and measurement on arcs and curved surfaces up to 360°.


Programmable draw-wire encoder, a first for market! from Lika Electronic thumbnail
04/17/2015

Programmable draw-wire encoder, a first for market!

Lika Electronic introduces a new range of incremental and absolute draw-wire encoders with increased measuring lengths up to 5,000 mm (196.85”) and 10,000 mm (393.7”). Worthy of remark the first cable-pulling measuring system with integral programmable incremental encoder.


All-round wheeled encoder for conveyor systems from Lika Electronic thumbnail
03/03/2015

All-round wheeled encoder for conveyor systems

IR01 is the underbelt measuring system encompassing a double rubber wheel with integrated incremental encoder and the mounting support in the same package. Easy to install, it tracks displacements more precisely.


SMP encoder for linear guideways from Lika Electronic thumbnail
03/03/2015

SMP encoder for linear guideways

SMP is the magnetic encoder designed for feedback on linear guideways, carriages, slides, positioning tables and all applications that need the scale to be mounted laterally.


Best in price analogue encoder from Lika Electronic thumbnail
11/13/2014

Best in price analogue encoder

With its quality feature set and the attractive price tag, MS40 series from Lika Electronic further grows adding the 4-20 mA and 0-10V analogue interface today.


Tough for rough! from Lika Electronic thumbnail
11/13/2014

Tough for rough!

MMK36 is the only multiturn absolute encoder with bearingless shaft in the market. Still it is capable of reliably and safely withstanding the most aggressive environmental conditions and ideally suited even for position measurements at speeds up to 4,000 RPM.


SFP draw-wire encoders gain analogue outputs from Lika Electronic thumbnail
10/08/2014

SFP draw-wire encoders gain analogue outputs

Lika Electronic is releasing new SFP series cable-pulling encoders that provide linear position feedback over distances from 300 mm / 11.8” to 2000 mm / 78.7” and analogue outputs now.


SSI to Profibus IF55 gateway from Lika Electronic thumbnail
10/08/2014

SSI to Profibus IF55 gateway

Connect your Lika SSI encoder to Profibus with the new IF55 gateway. IF55 gateway allows complete integration and full compliance with the Profibus-DP protocol.


Change-over at your fingertips from Lika Electronic thumbnail
09/17/2014

Change-over at your fingertips

LDT10 is the HMI touch panel specifically designed to easily interface and configure Lika RD rotary actuators, so auxiliary axes are more intuitive to operate and change-over operations become as fast as one touch.