Reverse Engineering

Reverse Engineering from JG&A Metrology Center

By: JG&A Metrology Center  01/23/2014
Keywords: Medical Imaging, imaging services, imaging center

Development of a CAD file with internal and external geometry from a CT dataset. Importing one unique CT dataset and generating a CAD file. The generic CAD file format that is recognized by many CAD, FEA, Fluid Dynamics, and Mold Flow Software.

Keywords: 3d x-ray, assembly analysis, Cat Scan, Computed Tomography, Ct Scan, imaging center, imaging services, Inclusion, Industrial CT Scan, Medical Imaging, Porosity,

Contact JG&A Metrology Center

Email

Print this page

Other products and services from JG&A Metrology Center

Fiber Orientation from JG&A Metrology Center thumbnail
01/23/2014

Fiber Orientation

Quickly identify internal and difficult to analyze part problems with industrial CT scanning. As a global leading provider of industrial CT Scanning Services, JG&A Metrology Center utilizes 3D non-destructive inspection methods to help clients drastically reduce pre-production inspection costs by quickly solving internal and difficult to analyze part problems.


GD&T Programming from JG&A Metrology Center thumbnail
01/23/2014

GD&T Programming

Quickly identify internal and difficult to analyze part problems with industrial CT scanning. As a global leading provider of industrial CT Scanning Services, JG&A Metrology Center utilizes 3D non-destructive inspection methods to help clients drastically reduce pre-production inspection costs by quickly solving internal and difficult to analyze part problems.


Wall Thickness Analysis from JG&A Metrology Center thumbnail
01/23/2014

Wall Thickness Analysis

After a part is CT scanned, a boundary is created around all internal and external part features. The distance between every surface is calculated and identified as the minimum wall thickness. The results are supplied in a color coded model showing variations from a pre-specified wall thickness. In addition to the 3D color coded model, 2D cross sectional whisker plots are also included with the results to show wall thickness deviations in cross sectional slices.


Void/Inclusion Analysis from JG&A Metrology Center thumbnail
01/23/2014

Void/Inclusion Analysis

After a part is CT scanned, a boundary is created around the part itself and for each internal void within the part. Internal voids are then quantified by the volume of each pore. Once the volume of each pore has been identified, the results are assigned a color based upon volume. In addition to volume, each pore can be identified within a part by its coordinate X, Y, Z location and individual sizes. Percentage of porosity within the entire part or within a specific area can also be supplied.


Assembly/Defect Analysis from JG&A Metrology Center thumbnail
01/23/2014

Assembly/Defect Analysis

Quickly identify internal and difficult to analyze part problems with industrial CT scanning. As a global leading provider of industrial CT Scanning Services, JG&A Metrology Center utilizes 3D non-destructive inspection methods to help clients drastically reduce pre-production inspection costs by quickly solving internal and difficult to analyze part problems.


Part to Part/Part to CAD from JG&A Metrology Center thumbnail
01/23/2014

Part to Part/Part to CAD

Quickly identify Internal and difficult to analyze part problems with Industrial CT Scanning. As a global leading provider of Industrial CT Scanning services, JG&A Metrology Center utilizes 3D non-destructive inspection methods to help clients drastically reduce pre-production inspection costs by quickly solving internal and difficult to analyze part problems.