residential sealcoating, flemington sealcoating, sealcoating flemington nj,
We offer professional sealcoating for your residential driveway and surrounding asphalt pavement. The following is a complete step by step guide of our sealcoating process:
We will power trim all overhanging grass around the edges of your pavement surface.
As a clean surface is extremely vital to a great sealcoating job , the entire pavement surface will be extensively cleaned and blown off, using steel wire brooms and large industrial push blowers to remove all accumulated dirt, dust, stone and debris.
Any visible oil or other petroleum marks on the pavement surface will be heat flashed to remove all surface solvents from the asphalt. They then will receive one coating of oil spot primer to help insure a strong cohesive bond between the marked areas and the newly applied pavement sealer.
Any cracks that measure 3/8 inch or larger (excluding pavement edges) will be cleaned of all dirt and debris and filled using the most highly advanced rubberized hot tar crack sealant available today. After any hot sealant is applied, a coating of Black Beauty sand will be applied, to promote proper adhesion to the sealcoating material.
Any Chicken Wire cracked areas (if specified on your proposal) will be cleaned and covered with hot rubberized crack sealant.
If specified on your proposal, we will perform pothole repairs by removing all loose debris from the pothole, applying an industrial grade synthetic asphalt patch, and compacting until set firm.
Once all the above steps are completed, we can start the sealcoating process. Our premium service will include manual brush application of our sealcoating solution to ensure a professional finish. We will brush applicate one liberal coat of our custom blended exclusive polymer modified R-P-355e pavement sealer to the entire pavement surface. We use state of the art mixing units of 4% rubberized polymer epoxy latex to provide added flexibility and a rich flat black color upon drying, and up to 4 pounds of silica sand per gallon of sealer for added traction and durability. This process provides the darkest, most durable and longest lasting non-skid surface they will ever have applied to your pavement. Our premium sealer is also environmentally friendly and has the lowest odor of any sealers available today.
Once the sealcoating of your pavement is completed, we will install a sign, wooden stakes and a barricade of caution tape, which should be left in place for a minimum of 48 hours. When you remove the barricade and drive onto the new surface, please remember to be gentle with your steering. Sharp turning may leave some tire marks on the new surface, but rest assured they will dissipate over time. If the car is stationary, do not turn the wheel on the new surface, these areas cannot be fixed.
All materials used by our company meet every federal and state specification for use in our line of work. We stand behind our materials and workmanship 100%. If you have any questions about your sealcoating application, we are only a phone call away. Since 1994, the reputation of our company has been built on our customer's satisfaction and we strive to continue to uphold and improve this.
, residential sealcoating
, sealcoating flemington nj