Abrasion resistant ceramic lined pipe

Abrasion resistant ceramic lined pipe from Sunny Steel Enterprise Ltd.

By: Sunny Steel Enterprise Ltd.  09/28/2014
Keywords: Abrasion resistant ceramic lined pipe

Ceramic Lined Pipe, Abrasion resistant ceramic lined pipe, Abrasion resistant pipe, Ceramic Lined Pipe Ceramic Lined Pipe, Ceramic Lined Elbows and Bends, Ceramic Tile Lined Pipes and Elbows , Bimetal Clad Pipe, Concrete Pump Pipe, Concrete Pump Boom Elbow, Honed Tubes for Hydraulic, Hard Chrome Plated Bars, Hydraulic Cylinder SHS (Self-propagating High-temperature Synthetic process) ceramic lined steel pipe and elbow create a new generation of abrasion and corrosion resistant engineering pipeline. The Manufacturing Process of Pipe and Elbow: SHS (Self-propagating High-temperature Synthetic process) ceramic lined steel pipe and elbow create a new generation of abrasion and corrosion resistant engineering pipeline.The composite steel pipe is composed of three layers: ceramic, intermediate, and steel layers. The ceramic layer is formed by molten alumina at a temperature above 2500 degree. The molten alumina produced from the reaction Fe2O3+2Al=2Fe+Al2O3 spreads on the inside wall of the steel pipe under the influence of a centrifugal force, then solidifies, so the ceramic layer has high density and smooth surface and bonds to the steel pipe. Abrasion Resistant Ceramic Lined Pipes have been uniformly produced by a thermite reaction induced under the influence of a centrifugal force (Centrifugal Thermite Process) without any high-temperature furnace facilities. The characteristic feature of the present process for forming uniform ceramic layers is in its reaction propagation as well as the reaction heat and centrifugal force. It is very important in improving the quality of the ceramic lined pipes to find the proper conditions of the reactant and centrifugal force; the former mainly determines the produced ceramic layer quality and the latter the achievement of layer separation and the mechanical properties of the pipes. Ceramic lined tube has great resistance against corrosion, abrasion and thermal shock. Features and Advantages: 1). High Abrasion Resistant: Vickers hardness of the corundum lining is HV1100 to1500, as high as that of tungsten-cobalt hard alloys, and the abrasion resistance is 20 times as carbon steel pipes. The composite ceramic lined steel elbow was used in a mining plant for about fifty thousands hours. The general service life of common steel elbow is about 700 hours. 2). Corrosion Resistant: Corundum is a neutral material, and is acid-proof and fouling -free. 3). Heat Resistant: Ceramic lined composite steel pipe can work under circumstances of -50 to 800 Celsius degree . 4). Lower Weight and Convenient Installation: The ceramic lined steel pipes are lighter than alloy pipes, cast iron pipes, and cast stone pipes and can be welded or connected through flanges, which reduces the expense of transportation and makes the pipes easier to install. For the pipes with the same sizes, types and length, the weight of ceramic pipe is about 1/2 of the wearable cast alloy steel pipe's, while the cost has reduced 10%~20% per meter. The weight of ceramic lined steel pipe is about 1/3 of the cast stone bent pipe's, 1/2 of the cast stone straight pipe's. 5). Lower Cost: Ceramic lined pipes can take place of expensive stainless steel, titanium, nickel, cast stone or alloy pipes. Extended service life can also reduce maintenance cost. Specifications: Tube diameters:50 to 1020mm

Keywords: Abrasion resistant ceramic lined pipe

Contact Sunny Steel Enterprise Ltd.

Email

Print this page

Other products and services from Sunny Steel Enterprise Ltd.

ASTM A333 Grade 6 Seamless Pipe from Sunny Steel Enterprise Ltd. thumbnail
03/02/2015

ASTM A333 Grade 6 Seamless Pipe

ASTM A333 Grade 6, ASTM A333 Grade 6 seamless pipe, ASTM A333 pipe, Seamless pipe for Low-Temperature Service, Welded Steel


ASTM A213 T9 Seamless alloy pipe from Sunny Steel Enterprise Ltd. thumbnail
03/02/2015

ASTM A213 T9 Seamless alloy pipe

Other standard specifications include the categories of A209 seamless carbon-molybdenum alloy-steel boiler and superheater tubes; A210 seamless medium-carbon steel boiler and superheater tubes and A213 seamless ferritic and austenitic steel boiler, superheater and heat-exchanger tubes.


ASME SA213 T5 alloy pipes from Sunny Steel Enterprise Ltd. thumbnail
03/02/2015

ASME SA213 T5 alloy pipes

Other standard specifications include the categories of A209 seamless carbon-molybdenum alloy-steel boiler and superheater tubes; A210 seamless medium-carbon steel boiler and superheater tubes and A213 seamless ferritic and austenitic steel boiler, superheater and heat-exchanger tubes. Piping wall thicknesses range from 1/2 inch to 5 inches. A213 grades also have the letter H or M assigned, which changes the composition and specifications for that series.


ASTM A213 T11 Seamless alloy pipe from Sunny Steel Enterprise Ltd. thumbnail
03/02/2015

ASTM A213 T11 Seamless alloy pipe

Other standard specifications include the categories of A209 seamless carbon-molybdenum alloy-steel boiler and superheater tubes; A210 seamless medium-carbon steel boiler and superheater tubes and A213 seamless ferritic and austenitic steel boiler, superheater and heat-exchanger tubes.


ASTM A213 T12 Seamless alloy pipe from Sunny Steel Enterprise Ltd. thumbnail
03/02/2015

ASTM A213 T12 Seamless alloy pipe

ASTM A213 T12 is the part of ASTM A213 Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, Heat-Exchanger Tubes. Grades containing the letter H in their designation have requirements different from those of similar grades not containing the letter H. These different requirements provide higher creep-rupture strength than normally achievable in similar grades without these different requirements. ASTM A213 T12 tubes shall be made by the seamless proces


ASTM A213 T91 Seamless alloy tube from Sunny Steel Enterprise Ltd. thumbnail
03/02/2015

ASTM A213 T91 Seamless alloy tube

Other standard specifications include the categories of A209 seamless carbon-molybdenum alloy-steel boiler and superheater tubes; A210 seamless medium-carbon steel boiler and superheater tubes and A213 seamless ferritic and austenitic steel boiler, superheater and heat-exchanger tubes. Piping wall thicknesses range from 1/2 inch to 5 inches. A213 grades also have the letter H or M assigned, which changes the composition and specifications for that series. This abstract is a brief summary of the


ASTM A213 T22 alloy pipe from Sunny Steel Enterprise Ltd. thumbnail
03/02/2015

ASTM A213 T22 alloy pipe

Other standard specifications include the categories of A209 seamless carbon-molybdenum alloy-steel boiler and superheater tubes; A210 seamless medium-carbon steel boiler and superheater tubes and A213 seamless ferritic and austenitic steel boiler, superheater and heat-exchanger tubes. Piping wall thicknesses range from 1/2 inch to 5 inches. A213 grades also have the letter H or M assigned, which changes the composition and specifications for that series. This abstract is a brief summary of the


Ceramic Lined Composite Steel Pipe from Sunny Steel Enterprise Ltd. thumbnail
09/28/2014

Ceramic Lined Composite Steel Pipe

Since the ceramic wear steel pipes ceramic layer (a-AL2O3), a neutral character. So with acid and seawater corrosion resistant , and also has anti-scaling and other characteristics.


Ceramic lined Wearable Tube from Sunny Steel Enterprise Ltd. thumbnail
09/28/2014

Ceramic lined Wearable Tube

Ceramic Lined Pipe, Ceramic Lined Pipes, Ceramic lined Wearable Tube Technical performance parameters ceramic wear pipeline Ceramic wear pipeline is


Ceramic Lined Pipe and Pipe Components from Sunny Steel Enterprise Ltd. thumbnail
09/28/2014

Ceramic Lined Pipe and Pipe Components

Ceramic Lined Pipe, Ceramic Lined Pipes Abrasion resistant ceramic lined pipe from a single spool piece to complete piping systems.


Ceramic-Lined Composite Tee from Sunny Steel Enterprise Ltd. thumbnail
09/28/2014

Ceramic-Lined Composite Tee

Abrasion resistant ceramic lined pipe from a single spool piece to complete piping systems. We specialize in ceramic restriction bend and flow conditioning assemblies to tame the most demanding flow applications.