Stainless Steel Filter Element

Stainless Steel Filter Element from Boegger Industrial Limited-filter element

By: Boegger Industrial Limited-filter element  10/22/2016
Keywords: Filter Element

Stainless steel filter elements are made up of several layers of 316 mesh that are sintered together to form an integrated porous element. The middle mesh is of very fine gauge and determines the filtration efficiency of the elements. This layer is then overlaid with inner and outer layers of coarser mesh, to give support and protection. The elements are a typical surface filter and the contaminants are retained on the surface of the filtration layer, this makes cleaning and back flushing a simple process. These filter elements should be ultrasonically cleaned to give best results. Stainless steel filter elements are particularly useful in heavily contaminated applications and for use as pre-filters before disposable type final filters. Gaskets are required with stainless steel filter elements. The options are Viton, PTFE or high temperature annealed copper. stainless steel wire cloth elements are idea for hostile or severe environments and applications. That is why clean ability is so important. All of our wire cloth stainless steel filter elements are easily restored back into service by back flushing, ultrasonic or other non-abrasive cleaning techniques. When used in filtration applications involving hazardous fluids, the clean ability of our stainless filter elements can significantly reduce disposal costs.

Keywords: Filter Element

Contact Boegger Industrial Limited-filter element

Email

Print this page

Other products and services from Boegger Industrial Limited-filter element

Gas Filter Element from Boegger Industrial Limited-filter element thumbnail
10/22/2016

Gas Filter Element

The most versatile filter, our stainless steel filter element is suitable for use in filtering steam, gases and liquids. The


Filter Media from Boegger Industrial Limited-filter element thumbnail
10/22/2016

Filter Media

We normally use stainless steel woven mesh 304, 304L, 316, 316L as filter media in the patterns of Plain, Twilled,


Candle Filter from Boegger Industrial Limited-filter element thumbnail
10/22/2016

Candle Filter

Candle Filters for polymer melt can be pleated in the body with several end types. Made of woven filter wire


Nozzles Strainers for Sand Filters from Boegger Industrial Limited-filter element thumbnail
10/22/2016

Nozzles Strainers for Sand Filters

Nozzles strainers for sand filters Material of construction: 316 or 316-L stainless steel.?” BSP thread. Slot opening: 250 micro (


Wire Mesh Strainers from Boegger Industrial Limited-filter element thumbnail
10/22/2016

Wire Mesh Strainers

We supply Stainless Steel Wire Mesh Strainers fabricated from woven wire cloth, mainly tea strainers and sink strainers, for kitchen


Liquid Filter Element from Boegger Industrial Limited-filter element thumbnail
10/22/2016

Liquid Filter Element

Liquid filtration is the removal of solids from liquids by flowing the contaminated liquid through a filter medium that will


Pleated Filter Element from Boegger Industrial Limited-filter element thumbnail
10/22/2016

Pleated Filter Element

Flow-Max filter cartridges outperform wound, spun, melt blown, resin bonded and other "depth" type filter elements because our cartridges are


Sintered Filter Elements from Boegger Industrial Limited-filter element thumbnail
10/22/2016

Sintered Filter Elements

Sintered filter elements are made out of five layer sintered metal mesh. Material: 316 SS. Pore Size: 5 Micron Nominal.


Wedge Wire Filter Elements from Boegger Industrial Limited-filter element thumbnail
10/22/2016

Wedge Wire Filter Elements

Here show wedge wire filter element specification: Flow Direction: in to out. Degree of Filtration (Slot Opening): 0.8 mm OR