TPI 716N Combustion Flue Gas Analyzer With Nitric Oxide for Flue Gas Boiler Maintenance

TPI 716N Combustion Flue Gas Analyzer With Nitric Oxide for Flue Gas Boiler Maintenance from Temperature & Process Instruments Inc

By: Temperature & Process Instruments Inc  02/02/2015
Keywords: Pollution Control, Flue Gas Analyzer, Boiler Combustion Analyzer

The TPI Model 716N Flue Gas Analyzer measures Oxygen, Carbon Monoxide, Nitric Oxide, Calculate NOx, CO/CO2 Ratio measurements is a state of the art, easy to use analyzer designed not only to display and calculate the required readings from a flue but also to cover most of the other measurements associated with combustion. Using the TPI-716N analyzer to determine combustion efficiency at the time of equipment set up minimizes call backs and can be used to verify to the home owner the value of service work by showing the increase in equipment efficiency after work is performed. Efficiency calculation can also be used to generate business by demonstrating the need to improve the efficiency of equipment or to show the benefit of purchasing new equipment with higher efficiency. The TPI Model 716 Flue Gas Analyzer meet and exceed the everyday needs of heating service engineers, gas installers, plumbers and HVAC Service Professionals.

  • Measure Oxygen, Carbon Monoxide, Nitric Oxide, Calculate NOx, CO/CO2 Ratio
  • Calculates Boiler Combustion Efficiency
  • Store function to save up to 50 readings
  • Data Logging with time and date stamp
  • Built-in differential manometer
  • Built-in differential thermometer
  • Ten selectable fuels: Natural Gas, LPG, Light Oil, Heavy Oil, Bituminous Coal, Anthracite Coal, Coke, Butane, Wood, Bagasse
  • Will not shut off if 15ppm CO is present for increased safety
  • Large easy to read backlit display
  • Optional A740 IR printer available for hard copies of test results

Keywords: Boiler Combustion Analyzer, Boiler Test Equipment, Flue Gas Analyzer, Flue Gas Combustion Analyzer, Pollution Control, TPI 716N Flue Gas Analyzer,

Contact Temperature & Process Instruments Inc

Email

Print this page

Other products and services from Temperature & Process Instruments Inc

HXG-2DR Sensit® Combustible Gas Leak Detector from Temperature & Process Instruments Inc thumbnail
02/02/2015

HXG-2DR Sensit® Combustible Gas Leak Detector

The Sensit® HXG-2DR is designed to detect combustible gases. This instrument incorporates an advanced low power semiconductor sensor to measure a wide variety of combustible gases in both the PPM and %LEL range.


BetaGauge PI-PRO Digital Pressure Calibration Test Gauge from Temperature & Process Instruments Inc thumbnail
02/02/2015

BetaGauge PI-PRO Digital Pressure Calibration Test Gauge

The BetaGauge PI PRO provides ±0.05% of full scale accuracy of pressure in any one of eighteen (18) ranges. Readings may be displayed in any one of 23 standard engineering units, or in 1 custom unit you define.


MECP500 High Pressure and Vacuum Pump from Temperature & Process Instruments Inc thumbnail
02/02/2015

MECP500 High Pressure and Vacuum Pump

MECP500 pneumatic scissor hand pump pressure and vacuum pump. MECP500 Pneumatic Hand Pump Pressure Range -12 psi (-0.8 bar) to 600 psi (40 bar). Also available as a kit with one test hose and one ¼" FNPT port and Hard Sided Carrying Case.


AQ PRO-V Portable Indoor Air Quality Monitor Kit WITH VOC Sensor 0 to 20ppm from Temperature & Process Instruments Inc thumbnail
02/02/2015

AQ PRO-V Portable Indoor Air Quality Monitor Kit WITH VOC Sensor 0 to 20ppm

AQ PRO-V Portable Indoor Air Quality Monitor Kit with CO2 Range 0 to 5000 ppm, CO 0 to 200ppm, VOC Sensor 0 to 20ppm, Temperature, % Relative Humidity, Barometric Pressure, Wet Bulb and Dew Point Readings as well as Bluetooth Communications and PC Software and USB Cable.


TPI 1008A Indoor Air Quality (IAQ) Meter Measure Carbon Dioxide and Ambient Temperature from Temperature & Process Instruments Inc thumbnail
02/02/2015

TPI 1008A Indoor Air Quality (IAQ) Meter Measure Carbon Dioxide and Ambient Temperature

TPI 1008A Indoor Air Quality (IAQ) Meter Measure Carbon Dioxide (CO2) Measurement 0 to 5000 ppm, Ambient Temperature -5°F to 140°F (-20°C to 60°C).


BTU 1500-1 Multifunctional Flue Gas Combustion Analyzer from Temperature & Process Instruments Inc thumbnail
02/02/2015

BTU 1500-1 Multifunctional Flue Gas Combustion Analyzer

The BTU 1500-1 multifunctional combustion analyzer measures Oxygen (O2), Carbon Monoxide (CO) and Carbon Dioxide (CO2) along with ALL of the necessary temperature, draft, and pressure measurements. The new Full COLOR Graphic Display and Built-In NON-THERMAL Printer you can display and print combustion efficiency reports. Designed to maximum your combustion efficiency, easily set-up, install, and properly service any residential and/or light commercial boilers and burners.


Thermcal 400 Dry Block Calibrator from Temperature & Process Instruments Inc thumbnail
02/02/2015

Thermcal 400 Dry Block Calibrator

ThermCal400 Portable Dry Block Temperature Calibrator Easily Calibrate your Thermocouples, RTD's and Bi-Metal Thermometers Temperature Sensors Temperature Range Ambient +5ºC/9ºF to 400ºC/752ºF.


BetaGauge 330 Pressure Calibrator High Performance Pressure Calibrator with Integrated Electric Pump from Temperature & Process Instruments Inc thumbnail
04/10/2010

BetaGauge 330 Pressure Calibrator High Performance Pressure Calibrator with Integrated Electric Pump

 The new standard of pressure calibration BetaGauge 330 Hand Held Pressure Calibrator High Performance Pressure Calibrator with Integrated Electric Pump


MC1210 Multifunction Dual Display Temperature and Processs Calibrator from Temperature & Process Instruments Inc thumbnail
11/04/2009

MC1210 Multifunction Dual Display Temperature and Processs Calibrator

Introducing the MC-1210 Precision Dual Display Multifunction Calibrator to measure and simulate thermocouples, RTD, Pressure and process variables. It’s a rugged and reliable universal calibrator with the new ClearBrite High Graphic dual display. Truly an all-in-one calibrator. The MC-1210 calibrator provides the functions and accuracy associated with fixed-installation, laboratory instrument, and has everything needed for virtually any calibration task. Measure and source the


Mp88700 Series DIN Rail Microprocessor Based Temperature Transmitter from Temperature & Process Instruments Inc thumbnail
11/04/2009

Mp88700 Series DIN Rail Microprocessor Based Temperature Transmitter

Mp88700 DIN Rail Mounted 2-Wire 4 to 20mA Output Microprocessor Based Transmitter with Thermocouple, RTD, mV and Ohms Input


PTC8010 Precision Universal Thermocouple and RTD Temperature Calibrator from Temperature & Process Instruments Inc thumbnail
10/18/2009

PTC8010 Precision Universal Thermocouple and RTD Temperature Calibrator

 The PTC-8010 Precision Temperature Calibrator with the New ClearBrite™ High Graphic Display is an ideal device to handle all of your temperature calibration needs in a truly rugged, low-cost package. It combines virtually all widely used thermocouples and RTDs in one device, you’ll never have to worry about finding a temperature device you can’t calibrate. This is especially true when calibrating “smart” or pulsed RTD transmitters, where many other calibrators fail to work or operate at re


DMC 1410 High Accuracy Documenting Multifunction Temperature and Process Calibrator from Temperature & Process Instruments Inc thumbnail
10/18/2009

DMC 1410 High Accuracy Documenting Multifunction Temperature and Process Calibrator

 The DMC-1410 documenting multifunction calibrator provides the functions and accuracy associated with fixed installation, laboratory instruments, and has everything needed for virtually any calibration task.


PSC PTLST-20M Series Portable Datalogging Infrared Thermometers from Temperature & Process Instruments Inc thumbnail
10/18/2009

PSC PTLST-20M Series Portable Datalogging Infrared Thermometers

The PSC PTLST-20-1M/2M Portable Telescopic, Laser Sight Portable Documenting Infrared Thermometer Designed For Demanding Industrial Applications


Mp82710H Programmable Transmitter with HART® Protocol from Temperature & Process Instruments Inc thumbnail
11/16/2008

Mp82710H Programmable Transmitter with HART® Protocol

Temperature & Process Instruments Inc. Introduces the Mp82710H 2-wire 4 to 20 mA head-mounting microprocessor based transmitter with HART® Protocol.