High R-Value Banded Systems (roof)

By: CMI Speciality Insulation  03/25/2016
Keywords: Insulation Contractors, Acoustical And Insulation Work, Foam Insulation

Decades of industry experience have given us a great understanding about systems that work and don’t work in metal buildings. Our systems greatly reduce labor costs and improve the overall look and feel of the building. The high R value banded insulation system is both efficient and cost effective. It is installed by fitting faced fiberglass between the purlins in the roof and then using unfaced metal insulation blanket to fill up the rest of the available space as the top layer. The entire system is then supported with a metal banding.

Keywords: Acoustical And Insulation Work, Acoustical Insulation, Building Insulation, Foam Insulation, Insulation Buildings, Insulation Contractor, Insulation Contractors, Insulation Installation

Contact CMI Speciality Insulation


Print this page

Other products and services from CMI Speciality Insulation


Vapor Barrier Facings | CMI Insulation

Making sure that roofs and walls do not leak, that the product is clean and dry prior to installation, and that condensation is controlled after installation is critical to the insulation performance and to the building’s interior aesthetics. Seams, joints, damage or punctures in the vapor retarder and penetrations should be sealed to retard the passage of water vapor around the insulation.


Residential Foundation Blanket | CMI Insulation

For an unfinished basement, where no framing is required, an efficient solution is our basement wall blanket insulation that is laminated with a white flame-resistant polypropylene facing. Insulate Walls Unroll insulation with the facing toward you and staple it every 4 inches to the top and middle furring strips. Some contractors prefer to install Furring Strips which the insulation can then be stapled to.


Polyisocyanurate Boards | CMI Insulation

TSX-8500 Series is designed for use without a thermal barrier in metal buildings and other light commercial structures, as well as, for basement and interior walls, agricultural, post frame and cold storage applications where local building codes will allow.